You are probably familiar with your car and know when it doesn’t work correctly. Shakes may occur when the car braking at high speed. Then the first question that comes to your mind is, why does my car shake when I brake? Car can shaking at speed for several reasons. It is necessary to spout this problem before it gets more serious. Here are few most prominent causes for your car shakes when you operate the braking.
7 Top Reasons For Car Shake When You Brake
1-Brake Pads And Rotor Caution
The most basic cause of a car shaking when you braking is the substance holding the rotor. The caliper puts pressure on the brake pads when you press the brake accelerator. Brake pads press on the wheels to prevent them from rotating. Brake pads can acquire oil, dust, and other elements over time. The material may shakes when the car braking pads do press.
In addition, the rotor becomes thinner over time, making it more sensitive to harm. Unnecessary heat created during braking can cause the rotor to bend. Brake pads slipping can also be the result of extreme heat. This can cause the brake pads to fall. Depending on the car’s weight, driving manners, and weather, it may need to be replacing sooner.
A sharp noise may also be heard from outside the car when braking. This may indicate worn brake pads. If this happens, replace the brake pads immediately. So, discuss your owner’s manual to decide when to renew your brake fillings. However, it would be great if you frequently replaced it every 50,000 miles distance.
If you find your car shaking when braking at high speed above 80 km/h, it may be an alignment problem. If you are driving a car at 50-55 mph and there are no other cars nearby, but its shaking, this could be a sign that you may have an alignment issue. Release the handle for a few seconds. However, keep it close by in case of an emergency. Check if the car is drifting slightly to the right or left.
If the car has no adjustment problems, you must go straight. If the vehicle is moving in one direction or the other, inspect it thoroughly to see if there are any alignment issues on any tire or all tires.
3-Dried Guide Bolts
If the steering wheel shakes when stopped, a dry guide bolt may be the problem. This guide bolt is part of the brake caliper. It serves to guide the brake pads to the rotor. These bolts must be kept clean and well lubricated to function. Drying or corrosion can prevent the pads or caliper from sticking to the rotor.
The caliper must be separated, examined, and greased. You can often solve this difficulty by removing and analyzing the caliper installation and using high warmth lubricant.
As with worn or misaligned tires and bent rims, your car can float as you drive. The rim is more likely to bend when going through potholes. At high speed driving, you may feel car is slight shakes on the bent rim. You can see that the car shaking gets stronger as you driving fast. Due to the bent rim, it cannot withstand vibration. It is essential to clean the edges before they do further damage.
Tires are another reason your car shaking when braking. If the tires are not correctly inflated or unstable in some areas, the vehicle’s stoppage system can be overloaded. Steering problems can also occur if the steering wheel shakes.
A mechanic should check wheel alignment when bringing a vehicle in for a tire change. Tire replacement should do done every 5,000-7,000 miles. However, you must check the distance with the manual.
6-The Power Steering Problem
The power steering of a vehicle consists of many parts. They all need to be in excellent condition to be able to spin smoothly. You may feel the handle turning more in one direction than in the other. You may also experience a shiver when turning the steering wheel. This one could indicate a problem with the power steering.
If the vehicle is stationary, repeat the movement to see if the car vibrates. If the car shakes when turning the steering wheel at speed, it may be due to the steering component. One of the hoses may be leaking.
It can shake when the car is moving as well as when brake at speed. Small rocks and pits can damage the suspension over time. If the car shaking when braking, it could be a sign of a suspension problem.
A constant velocity (CV) joint attaches to a vehicle’s rear axle is another component affected by axle damage. The car can shake when brake, if the rubber boots protecting the CV joints are corrupted or clogged with dust and trash. Almost all of these joints are affected by axle issues.
A vibrating car can be just as serious as a brake failure; A qualified mechanic should inspect the vehicle if the car is shaking when braking—a good mechanic who uses the latest technology and equipment to keep your cars like new. So, contact your workshop and make an appointment and get your vehicle back on the road as soon as possible.
For Answer, How Long Does A Car Battery Last? Visit Here